Class 00, 11" Length, 500V AC: 70E Insulated Electrical Glove Kit

(No reviews yet) Write a Review
SKU:
GK0011
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
  • Insulated Electrical Glove Kit - Class 00 - 11" Length - 500 VAC ## GK0011 ##
$154.89
Frequently bought together:

Description

Salisbury linemen's gloves are extremely flexible to make working with small parts easy.

  • Class 00
  • Color options: Black, Red, Yellow
  • Gloves meet or exceed ASTM D120 and IEC EN60903 Standards.
  • 11" length
  • Max use: 500 VAC

Sizing

Salisbury linemen’s gloves are available in a full range of sizes, from 7 through 12, including half sizes (there are no 7 ½ and 11 ½ ).To determine glove size, measure the circumference around the palm in inches. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners. For more information check out our blog post!

glove-size.jpg

 Leather Protectors

ILPG10 Series Leather Protector

ILPG10 Leather Protector

Manufactured from top grain goatskin, these protectors provide excellent protection for rubber insulating gloves at a very economical price. The ILPG10 series gloves are specifically designed for Salisbury class 00 & 0 ASTM Lineman's gloves. They come in size 7, dual sizes 8/8.5 through 11/11.5 and size 12.

Using these gloves along with leather protectors will greatly extend the life of the gloves, add thermal protection in the event of an Arc Flash and help protect the gloves from punctures; it is also the standard.

ILPG10A Series Leather Protector with strap

ILPG10A Leather Protector

ILPG10A protectors available with non-metallic buckle and pull strap or elastic wrist. Leather Protector Gloves should always be worn over Insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. The ILPG Series is manufactured from top grain goatskin.

 

 

Storage

GB-2210 Glove Bag

GB-2210

 The 70E Solutions 12" canvas glove bag is the perfect way to store each pair of gloves and will pay for themselves time and time again.

This bag is made from #10 canvas duck and is double stitched on all seams. There is a flap over the top with snap fasteners. On the back there is a quick release snap for attachment to belt which is reinforced inside and outside with leather. Both the snaps and quick release snap are nickel plated to prevent rust. The rivets are capped to prevent scratching of the rubber gloves. Grommets in the bottom provide drainage. Stress points have extra stitching for durability.

 

Mandatory Glove Testing

All rubber insulating gloves 70E Solutions sells are tested at our in house testing facility to ASTM standards. 70E Solution’s lab technicians visualize, dielectrically test and fill out a lab report on all of our newly sold rubber insulating gloves.

All gloves come date stamped, sealed in a plastic bag and contain a lab report. There is a charge for this service.

 

CALIFORNIA RESIDENTS:

WARNING Cancer and/or Reproductive Harm – see www.p65Warnings.ca.gov for more information.



View AllClose