AEMC 2155.57 6536 ESD Floor Kit 100V Megohmmeters

AEMC 2155.57 6536 ESD Floor Kit 100V Megohmmeters

The Model 6536 is also available as a floor resistance testing kit (see § 2.2.5 in the user manual) for testing both point-to-ground and point-to-point electrostatic discharge (ESD). In addition to the instrument, the kit contains two 5 lb. (2.3 kg) floor weights (also referred to as NFPA probes) that are in compliance with EOS/ESD 11.11 specifications. Each floor weight is coated with insulating paint and a conductive rubber base. The instrument, floor weights, and test leads are packaged in a rugged field case. The kit provides all the necessary elements for compliance with the ANSI/ESD STM97.2-2006 standard for testing ESD flooring

Features

• True Megohmmeter
• 10 to 100V (variable) Insulation and Multi-Function Tester (Resistance, Continuity and Voltage)
• Variable 10 to 100V (1V increments) Insulation Test Voltages
• 20GΩ Max Insulation Resistance
• Timed Test Mode up to 40 minutes for Insulation Resistance Test
• Test Lock feature for hands free timed measurements up to 15 minutes
• Continuity tests at 20mA or 200mA
• Test lead resistance compensation for accurate low resistance measurements
• True RMS AC/DC Voltmeter up to 700V
• Ohmmeter to 1000kΩ
• Auto discharge after Insulation Test
• Hold function to "freeze" readings
• Large and bright dual display with blue backlight
• Auto Standby Feature due to inactivity saves battery power
• 1300 Measurement storage in memory
• Bluetooth communication with included DataView software
• Complies with International Insulation Testing Standards including IEC/EN 61557
• 600V CAT IV
• Optional Remote Probe accessory
• Optional ESD Floor Test Kit

Application

• Insulation measurement on communication cables, Ethernet cables and other low voltage AC and DC wiring
• Insulation measurement on electronic components and circuits
• Special applications in the aerospace and defense sectors where specified test voltages are required
• Cables, small motors, pumps, transformers and industrial equipment

The kit includes:

• (1) field case
• (1) Megohmmeter Model 6536
• (2) 5ft color-coded (red/black) leads
• (2) color-coded (red/black) alligator clips
• (1) black test probe
• (2) color-coded (red/black) grip probes
• (2) 5 lb weights with conductive rubber bottom pad
• (2) 4mm non-insulated adapters
• (6) AA batteries, and a user manual

Statistics